External angle for SH1 trunking - Aluminium finish

No, this external corner is designed exclusively for the EUBIQ SH1 trunking. It is not compatible with other references in the EUBIQ range or with trunking from other brands. Before placing your order, we recommend that you carefully check the reference number of your trunking to avoid any returns. If you are using a different trunking reference, please consult the corresponding product sheet to identify the appropriate accessories.

An external corner refers to a protruding corner, i.e., an angle that "juts out" from the wall or partition. The trunking must therefore bypass this protrusion from the outside. Conversely, an internal corner corresponds to a recessed corner, where the trunking enters a nook. These two accessories are not interchangeable: if your installation includes both types of corners, you will need both distinct references. If in doubt, simply observe whether your corner forms a dip or a bump in your space.

This corner is fixed and designed only for 90° angles, which corresponds to the vast majority of standard wall configurations. It is not possible to adjust it to a different angle. If your installation has an atypical angle—for example, in a slanted hallway or on an inclined surface—you will need to look for an adjustable corner accessory, available separately. For a classic configuration in an office, workshop, or residential space, this fixed 90° corner will perfectly meet your needs.

It is technically possible to create a corner by cutting two sections of trunking at a miter angle yourself, but this approach has several practical drawbacks. The aluminum cutting edges can be sharp and damage the insulation of your cables. A slight inaccuracy in the cut creates an unsightly gap that is difficult to fix once installed. Finally, this method requires time and equipment, for a result that is often less clean than an original part. The EUBIQ SH1 external corner is a perfectly sized piece designed to fit without gaps, eliminating the need for DIY and providing an immediate professional look from the first installation.

Installation is quick and does not require any specific tools in most cases. Start by cutting your two SH1 trunking sections at 90° (straight cut, not mitered). Then, fit the corner piece onto the end of each section: the part is designed to insert without force. Check that the two sections of trunking are well-aligned and that the corner is properly flush against the wall surface. If necessary, secure the trunking according to the SH1 range recommendations, using screws or adhesive depending on your mounting surface. In four simple steps, you get a clean and durable transition.

Yes, the external corner for SH1 trunking is sold individually. Simply count the number of protruding (external) corners on your trunking route and order the corresponding quantity. For example, if your installation goes around two outward-facing corners, you will need two external corners. Also, remember to check if any corners on your route are internal angles, which require a different accessory.

Absolutely. The aluminum finish of this EUBIQ SH1 external corner is both aesthetic and durable. Aluminum does not rust, making it particularly suitable for slightly humid environments such as workshops or garages. Its matte and discreet appearance blends harmoniously into most interiors and professional spaces while matching the rest of the SH1 range perfectly. At only 30g, this lightweight part makes handling easy during installation without ever compromising the sturdiness of the assembly.